Australian Roofing Materials – Arm.net.au

We offer advice and recommendations on Australian based roofing materials used in the roofing industry

Guide to Roof Plumbing

Learn About Skills and Qualifications For Roof Plumbers

What is roof plumbing?

Roof plumbing is any work that involveS fixing, installing, renovating, maintaining roofs, pipes, gutters, including side walls attached to it but excluding glass, concrete of or timber. It also involves installation of lights and ventilating systems as well as chimney related works. Mostly the roof plumber just comes in to fix broken parts of the previously mentioned area of responsibility. Roof plumbing is often believed to be a “Dad Job”, but there are instances wherein you need professional roof plumbers to get the job done.

For roof plumbers, there are different certifications in order to become qualified. The following are their specific expertise: Erect and dismantle scaffolding, operate elevated work platforms, calculate plumbing quantities, know basic plumbing services like store plumbing and use of plumbing tools, installing roof sheeting and wall cladding, collect and store roof water for infrastructures and install solar, or any environmental protection systems or energy gathering power systems. They also have to know how to clear blockages in gutters and pipes. Local plumbing contractors Pro Plumber Brisbane stated that any contractor will usually perform plumbing for roofing projects. As long as they have their plumbing contractor license, they can do all kinds of plumbing to roofs, whether it be for maintenance or new installations

Visit Pro Plumber Brisbane

Does a roof plumber need to qualify in Queensland?

Yes, there are various certificates needed for a roof plumber to operate in Queensland, more often, you need an expert to fix roofing problems and not someone who will make matters worst. TAFE Queensland offers services for roofing plumber trainingeeships and relevant courses for a person to work in such field. There are also other training providers in Queensland but this is one of the most well-known. Mostly, you need at least 10 years of numeracy and literacy to apply for such programs.

 

The following are some of the certifications and qualifications for a Roofing Plumber. These are delivered certifications done in lectures and apprenticeships. They can range from plumbing, gas fitting, and roof plumbing in general.

  • CPC32612 Certificate III in Roof Plumbing
  • CPC 2413 Certificate III in Plumbing for Apprenticeship
  • CPC 32713 Certificate III in Gas Fitting

 

In these courses students usually have discussion and employer works in order to have an outcomes-based learning and application of the lectures.

Roof plumbing Services

 

The following are the responsibilities of a roof plumber:

  • Install gutters, rainwater tanks, pipes, downpipes and any other material found around the roof area.
  • Know how to work with roofing structures such as metal, fibreglass, and waterproof roofing materials for installation and dismantle
  • Know how to interpret roofing or pipe plans and be able to apply it accordingly
  • Calculates measurements, like size of roof, pipes and tanks
  • Installs, maintains, repairs, dismantles any roof related materials
  • Know the roofing drainage system and how to effectively execute the roofing pipe plan

These key responsibilities need training and professional guidance in order to have effectively delivered services.

When would you need a roof plumber?

You would need a roof plumber once you want something to be fixed, installed, dismantled or maintained on your roof, like tanks, pipes, and other materials found in the roof area. Roof plumbers often know what to do with leaks and blocked gutter drainage. They also know how to handle construction piping and how to install roof works.

guide to roof plumbing

Tips For Hiring the Best Roof Plumber

If you’re looking into hiring a roof plumber be sure that;

  1. Check his certifications and credentials, sometimes you need an expert to handle roofing and piping of your house.
  2. Check out his previous clients and ask about feedbacks of his job.
  3. Check the company that he is working for if it is a reputable and trusted roof plumbing company
  4. Ask him about suggestions on what to do in solving your roof problem, this is how you will know that the solution will be effective
  5. Be sure to keep an eye on him while he does his job, so you would know the progress
  6. Always ask for a contract or quotation of services , you don’t want to pay unecessary extras if the job can be done at a certain span of time. This is also to make sure that he does not drag around the project.

Conclusion

Roof plumbing is often times needed especially if you’re a home owner. There will come times when you need someone to go up there and fix the problem, roofing plumbers are those people who would get the job done for you. In considering a roof plumber, also do background checks in terms of performance and trustworthiness because you will be letting this person inside your premises.

Read More

Shipping Container Modification Ideas

Shipping Container Modification Ideas

Great Ways To Modify Containers

Shipping Container Modifications Ideas

Do you need an extra storage space for your business or home? Then you don’t have to invest in a construction project which can be costly and take a long time to complete. You can easily modify shipping containers in Australia and change them into the most secure and functional storage facility. Use a set of essential tips to help you with this.

The Right Unit

You need to figure out how large of a storage facility you will need. This will depend on the types of items which you want to store and on their size, shape, and weight. You have to consider the amount of space which you have available for setting up the shipping container. There are two main size option – 20-foot and 40-foot containers. If you’re dealing with an experienced company, you may find 8-foot and 10-foot units as well.

The unit which you choose must be in a good condition. You can ask for its serial number to help you find its age and also to track its previous use. The so-called one-trip containers are the latest and newest and are virtually damage-free. Despite the age, shipping history and specs of the unit, you have to inspect it very carefully in order to be on the safe side. Keep in mind that a little bit of rust is okay as long as it hasn’t progressed into noticeable corrosion. There are many suppliers both selling and hiring shipping containers. Based in Queensland with branches throughout Australia is Nationwide Container Sales, whos specialsies in new and used containers.

Container Hire Brisbane

The Perfect Layout

It is up to you to make a decision on how large and how many racks and shelves will be installed. You should create the layout in advance before the modification of the shipping container starts. Make sure that there will be enough walking room between the shelves and racks. Additionally, you need to ensure that storage items of large size will not get stuck. You have to decide whether you require additional fixtures and fittings such as a working bench.

Safety and Security

It is a good decision for your shipping container to be set on an area above the ground in order to be perfectly level and better protected. You can also opt to set it on special blocks to permit the air to freely flow underneath it. It is crucial for you to ensure good air circulation inside as well. We have special vent units which are designed for that purpose.

When it comes to security, these containers are very difficult to break into. Their locks are very tough. It may be very difficult to cut the metal walls. If you want even a higher level of security, special lock box can be installed.

Provide for good ventilation

It is recommended that you use a foundation platform which will make the container even and allow for good under-floor air circulation. It is also possible for vents to be installed on the walls. A specially designed ventilation unit installed on the ceiling will do a very good job. If you plan to use the modified shipping container daily and spend a lot of time inside, you can consider the installation of a complete heating, ventilation and air-conditioning system.

Install insulation

This is important for achieving comfort and energy efficiency. You can use material which is directly sprayed on the walls. It is also possible to use rigid panels which are installed on the exterior walls. Roof and floor insulation is also recommended. Once the insulating material is in place, you can install drywall and flooring. You can choose any type of floor material depending on your preferences and requirements.

Install A Roof

This is not something people generally think of. But having an insulated roof on your container can dramatically improve the temperature control. Esopecially if you want to live in it, or use as an office. Even some storage items can benefit fgrom cooler conditions. Think of installing a roof on your container for added comfort.

Solar Panels

You should consider using renewable energy for your modified shipping container. You can install solar panels on top to make your own electricity.

Finally, you can make other modifications to your shipping container if you wish. You can consider various sizes and types available with the company and then you can have an appropriate idea on what you exactly need or how you want your container to be modified. You can also develop a sketch of your modified container by using CAD/graphic design. This model will ensure you that every work in going on right steps. It will also help you get the right modifications according to your preferences and needs. The modifications are done to suit your budget and requirements. The skilled team will always be there to help you with modification specifications.

So if you looking for a shipping container to modify you can see the options are endless. Shipping containers are a great way to think aoutside the box when it comes to affordable living and storage.

For informaiton on purchasing in Queensland, New South Wales or Victoria, contact your nearest container supplier.

Learn more about container architecture https://en.wikipedia.org/wiki/Shipping_container_architecture

Read More

The 3 Most Popular Roofing Materials in Australia

The 3 Most Popular Roofing Materials in Australia

Popular Roofing Materials in Australia

When you are to choose the roofing material for your house, there will be many things that come into your consideration. The most common aspects to consider in selecting the materials are their weather resistance, their durability, the cost, and whether or not they are suitable for the shape of the roof you are planning.

In some cases, most people also consider the trend and aesthetics in selecting their roofing type. It is completely understandable that you want your house to be as good as you expected. However, it is good for you to know that the choice of color of the roofing materials affects the level of heat that will be reflected. Therefore, most manufacturers produced darker colored roofs. Here are the 3 most popular roofing materials in Australia:

  • Terracotta Tiles

Terracotta tiles are the common choice for roofing materials in Australia. Not only that they look good, but also because they suit the weather so well. They also have impressive durability and come with different profiles and color options. They are slightly expensive but low maintenance.

When some tiles give in to the weather after a few years and break, you can simply replace them with new ones without much difficulty.However, terracotta tiles have one weakness. They weigh a bit more and your house will have to be build with a strong structure which can support their weight.

 

  • Metal Roofing

Metal roofing is the other popular choice in Australia. It is well known for its durability and lightweight. This type of roof material can also be used for many shapes of roof. Most homes in the earthquake route will likely use this material.

Though most houses that use this type of roofing are quite distant and the transportation cost is obviously expensive, house owners do not seem to mind because this material is able to reflect more sun. And there has been studies saying that using metal roofs can help you with the energy bill.

Metal roofing comes in different variations like:

  1. Galvanized iron, copper and zinc that are suitable for contemporary or lightweight houses
  2. Steel composites such as Zincalume that are designed for contemporary or lightweight house)
  3. Metal tiles such as CoRoofs with polyester coated surfaces. Because they have a tile shape, these sheets are compatible with brick.
  4. Sheets of copper or zinc are also interesting, durable materials for contemporary buildings but they are on the first list of most expensive roofing materials.

 

  • Slate Tiles

Slate Tiles has been the most common choice for a long time. Though they cost a lot, the roof which uses this type of material is attractive with the natural finish. Though you will have to deal with the weight issue as in using terracotta tiles, Slate tiles are compatible for any roof styles.

As in terracotta roofing, broken tiles in Slate roofing can easily be replaced or fixed. The amazing thing is that they can last over a hundred years and keep on their classy looking. They are available in grey, green/grey and blue color shades.

 

Summing up, the roof materials you choose should not only fit the design of the house as a whole unit, but also fit your budget. Stay away from light colored roofs because instead of making the house looking attractive, they will make it look ridiculous because they cannot complement the other part of the house.

Read More